Payment & Shipping Terms:
|Laser:||Diode With Fiber Cable||Laser Power:||3 - 15 KW|
|Power Stability:||2%||Laser Wavelength:||1064 Nm|
|Warranty:||2 Year||Service:||Overseas And Online For Whole Life|
Laser Quenching Machine Equipment Hardening Cladding For Cold Roller/Automobile Mould/Shaft/Worn Blade 4KW
Cladding process choose circular laser spot. Quenching process choose the square laser spot. Ensure movement mechanism movement in any direction when the shape of the cladding layer has been consistent. Cladding alloy powder loaded HGSF-2A high-precision binoculars powder feeder tube powder, powder with a carrier gas flow rate constant (typically argon / nitrogen) alloy powder into the powder feed pipe, powder dispenser Way Get reach head office. Powder flowing through the annular space to enter a special powder feed nozzle, below
the powder feed nozzle polymerization. Powder aggregation point in the laser beam focus on the Strategy of 1mm. See Figure 4. Polymeric powder diameter smaller than the diameter of the focused spot. After the powder in the air absorption of the laser beam energy liquefaction, down to the work surface, solidified after leaving the beamforming the cladding.
This system uses Siemens PLC as the main control unit, laser, KUKA robot, powder feeder, vertical and horizontal rotary machine, man-machine interface and so on.
|Output power range||3-15kW|
|Electro-optical conversion rate||≥40%|
|Input voltage||380V 3phase five-wire @50Hz|
1. Full CNC control by Siements
2. Through a central control unit, to achieve a variety of shapes of parts laser hardening,
3. Laser alloying and laser cladding requirements to meet the surface of advanced
manufacturing and remanufacturing of new product failure of the product.
4. Excellent processing performance,
5. Small deformation of the workpiece,
6. high degree of automation, repeatability and other significant technological features,
7. High-end products become resolved to strengthen and remanufacturing indispensable means of technology
Horizontal rotary table and 2D Tilt Jig
|1,Robot linear axis|
|Robot linear slide range||2500mm|
|Robot linear slide speed||0-5000mm/min|
|Robot linear slide transmission mechanism||Rack and pinion|
|Robot linear axis motor and driver||KUKA Servo motor and driver|
|2,Rotate axis,T worktable and Tailstock|
|Rotary axis head box placement||Horizontal|
|Horizontal rotary load||5T(Chuck pins loading),20T(Roller loading)|
|Vertical rotary load||1T|
|Rotary axis box center height||1000mm|
|Rotary axis Chuck and tips||Φ630mm 4-Jaw chuck,standard double tips|
|Rotary axis rotate speed||
0-15rpm, Enter the robot program,
|Machine worktable size||9500*1200mm,table is Integral casting|
|Tailstock and tips||Tips Taper=60℃, Mechanical expansion200mm|
|Tips Sleeve diameter||Φ200mm|
|Roller||2pcs,copper surface roller|
|Rotary axis motor and driver||KUKA Servo motor and driver|
|3,2D Tilt Jig|
|Motion axis||Flip, swivel, in which the rotary axis uses KUKA servo motor and drive|
|Chuck diameter||Φ315mm,Three-Jaw self-centering|
Typical applications: automotive mold, mining machinery, coal machinery, petrochemical machinery, generator sets, rolling mill machinery and other large mechanical parts.
Metallurgy, mold, machinery manufacturing, petrochemical, light industry, energy, transportation, military and other industries.
Optical head specifications and characteristics
OD processing head: According to different process requirements, it adopts the German laserline imported OTS-5 optical head, fast cladding and traditional laser cladding using a circular spot laser head, laser hardening and wide cladding using a rectangular spot laser head, spot size: Ø1 .6-2mm (fast cladding), Ø3.5-4mm (normal cladding) and 17mm (wide cladding and hardening) total 3 pcs, in addition, equipped with a special ID cladding processing head. The following picture shows laserline imported OTS-5 optical laser head, for reference only, subject to delivery:
ID professional cladding lens and powder feeding assembly, F1 (collimation distance) = 81mm, F2 (focus distance) = 300mm, optical lens diameter 1 inch, spot size is about Ø3.5mm, including collimating lens, focusing lens, Components such as turning lenses, protective lenses, etc., bi-directional side-shaft powder feeding, can be welded to a minimum inner diameter of 125mm, depth of 600mm, and can withstand a maximum power of 3kW (1h).
KUKA KR60 Robot
|Max payload||≧60 kg|
|Drive mode||AC Servo motor|
Powder Feeder Machine
Powder feeding unit for laser cladding and repair welding applications.
Special plate conveyor system guarantees exact and repeatable powder feeding rates.
2 powder jars (each approx. 1.5 l) with stirrer (on/off)
Volumetric measurement of carrier gas flow (Ar/N2).
Incl. control panel and documentation.
It adopts copper metal as the material integrated design, with Φ6mm water cooling at room temperature, and the opening size of the bypass wide-band powder feeding nozzle is 15*1.5mm.
Suitable for 17*3.5mm spot cladding for powder particles of 20-200μm, powder spraying rate 20 - 300g / min (depending on process data such as laser power, speed and thickness), can spray Fe, Ni, Co based Alloy (taking Fe-based alloy as an example, the cladding efficiency is 7.5 kg / h for 8 kW laser and 5.5 kg / h for 6 kW laser).
1.Q:What is the warranty of the Laser cladding machine equipment?
2.Q:Are you a factory ?
A:We are factory over 20 years.
3.Q:How about the quality?
A:Germany Technology.High quality with best price.
4.Q:What is your after-sale service?
A:Overseas and online service ! We can send engineers to your factory for assembling ,adjusting and training!
5.Q:How can i get assurance of my Payment?
A: Alibaba have Trade Assurance,you can pay throught Alibaba. We have so many online orders.