Payment & Shipping Terms:
|Cooling:||Air Cooled||Laser Power:||10W / 20W / 30W / 50W|
|Service:||Engineer Oversesa Service||Laser Type:||Fiber Laser|
|Special Device:||Rotary Device||Marking Area:||175x175mm Optional|
laser marking equipment,
desktop laser marking machine
Laser Marking Equipment automation system rotary device for lamp bulb 30W power
Quantum- FL30R Laser Marking equipment has a special rotary device, mainly for marking and testing lamp bulbs. It can realized automatic edition and correction of characters, signs, graphs, images, bar codes, twodimensional codes, automatically increased serial numbers.
Adopting most advanced fiber laser and speedy scanning ststem. Good quality beam, long using life, stable equipment performance exempts maintenance. It is speedy and precise, marking has non-touched proces, it is better than other machines.
Laser marking equipment features
1 Low cost for using
2 Long lifetime laser device (>100,000 hours)
4 Very small demand for using environment
5 High quality of laser beam.
6 Equip with a big rotary device
|Purpose||Marking / engraving|
|Laser Type||Fiber Laser|
|Laser Output Power||30W|
|typical Laser Life Span||100,000hrs|
|Max. Working Speed||7000mm/s|
|Working Area||70x70mm , 110x110mm, 160x160mm, 175x175mm (standard) ,220x220mm|
|Min Line Width||0.01mm|
|Marking/Cutting Depth||0.01-0.2mm (depending on material)|
|No. Axis||3 Axis (Manual) Z axis auto optional|
|Power supply||AC220V, 50/60Hz, 1kVA (110-120V Optional)|
|Controller||Computer with marking software|
|USB 2.0 Compatible||YES|
|File Types||PLT, DXF, AI, DST, BMP, JPG, TIF|
|Max. Operating Time||24hrs (recommend 1hr cool-down period)|
|Guarantee:||(see Ts&Cs on support page)|
|General Guarantee||12 Months from date of arrival at destination|
|Laser Source||2000hrs/3 months - LAMP PUMPED & CO2(Except Smart Series)|
|20,000hrs/18 months - Smart Series|
|10,000hrs/12 months - Diode Pumped|
|100,000hrs/2 years - Fiber LASER
It can mark almost all kinds of materials.
This machine is specially design for lamp bulbs, for marking and also for testing if the bulb is good after made out from production lines.
Contact Person: Mr. Andy Zuo