Industrial Laser Cutting Machine For Military Aerospace industry 30000W
FL3000S-2040 Industrial Laser Cutting Machine has equiped with a a big sealed working table 2000x4000mm, which can protect the workers during cutting operation. The laser power is very high, reaching 3000W, so it can cut very thick metal sheet up to 20mm.
Because of the big working area, the laser cutter can working for military and aerospace industry, cutting very big size metal sheet to make special unit parts for machinery.
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
Fiber laser source is the most advanced laser source for metal cutting, there are a lot of unique advantages, such as free maintenance, lowest power consumption and longest working lifespan and the most important is highest accuracy and efficiency during processing the metal materials. For the laser source, we import from the most famous company IPG to ensure our machines good quality.
1. Great Performance: Identical cutting quality on any cutting point is realized through fiber transmission.
2. High Efficiency: The rapid cutting speed is two times higher than that of CO2 laser machine.Its use-cost is low.
3. Low Consumption of Gas: Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4. Low Consumption of Energy: It is environment-protecting and energy-saving.Its power consumption is reduced by 20%-30% compared with that of CO2 laser machine.
5. Maintenance-free: Reflecting lens is not needed for fiber transmission.Much time is saved when optical path is adjusted.It is maintenance-free
6. Install Proportional Valve: Use software to change the air and control the air pressure automatically, no need to change the air manually, it can save you much time;
7. Stable working table: Use 8mm thick steel side board, around 3.5 tons in weight;
8. Dual drive, aging treatment, stress relief test to ensure long time fast running without changing shape;
9. Auto focus system to change focus length automatically while process uneven materials
10. Nesting Software provides efficiency and saving materials
|Laser source||Fiber laser (IPG)|
|Max working area||3000x1500mm|
|Working table||Single (double exchange tables optional)|
|Z axis movement||100mm|
|Max cutting speed||18m/min|
|Max cutting thickness||1-16mm according to materials|
|Laser Cutting Head||Auto focus Raytools from Swiserland|
|Servo Motor & Driver||YASKAWA From Japan|
|Reducer with Gear||Shimpo from Japan|
|Rack Pinion||Hiwin from Tanwan(World Brand)|
|Linear Guiderail||Hiwin From Tanwan(world Brand)|
|Control System||CyperCut8000 from Bochu China|
|Oil Lubricated||Automatic lubricated|
|Gantry System||Steel gantry|
|Pneumatic Control||SMC from Japan|
|Machine Dimension||4650*2300*1750 mm|
|Power Protection Level||IP54|
|Voltage||Three Phases 380V, 50HZ|
|Material / Laser Power||500W||750W||1000W||1500W||2000W||3000W||4000W|
It has been widely used in the field of aviation and space, weapon, warship, petrifaction, medical, instrument, micro-electron, auto mobile car and so on.