Jewelry Soldering Equipment Free water chiller for cooling 200W welding Gold silver
Robot200 micro laser welding machine is an of important applicable fields,whose processing type is heat transmission, processing work pieces surface by laser radiation , heat transmit from surface to bowel, by controlling laser width, energy, top power and repitition frequency to melt workpieces , form a special melting pool.
The spot welding process is thermal conduction, i.e. the laser radiation heats the surface of work piece, and the surface heat diffuses to the interior through thermal conduction and melts the work piece by controlling the width, energy, peak power and repeating frequency of laser pulse to form specific molten pool.
There is no depression phenomenon at the junction between the material and matrix, oxidation rate is low after argon protection, workpieces can not change colour. There are obvious advantages in repairing small rift, complex angle of the sand hole.
1 Humanized design, can work fot long time
2 high efficiency, small heat-affected zone
3. Use the most advanced light shielding system to eliminate the irritation to eyes by light during working.
4. Able to work for 24 hours continuously; stable performance; free of maintenance in 10,000 hours.
5. Human-based design accords with ergonomics, avoiding fatigue after long time working.
Specification data sheet
|Output laser power||200W|
|Laser power supply||4KW|
|Laser welding minimum melt pool||0.1mm|
|Laser pulse frequency||≤50Hz|
|Laser pules width||≤20ms|
|Port adjusting scope||0.1～3.0mm|
|Protective gas||yes (N2)|
|Power demand||220V one-phase/50Hz/20A|
|Figure size of system||Laser welder||1160X640X1410mm|
Jewelry, golf head, medical equipment, instrumentation, electronic, mechanical processing, auto, specially used in filling hole on gold and silver jewelry, spot welding slot and parts and claw foot position
Jewelry welding Sample