Payment & Shipping Terms:
|Laser Power:||20 Watts||Beam Width:||10-70mm|
|Laser Source:||Fiber Laser Device||Service:||Online And Overseas Service|
Laser Rust Remover Machine Cleaning Paint/Dust/Oxide Coating 2 axis Scanning motor
QA-LC20D is a 20W portable laser cleaning machine with 2 scanning motor. Low power demo machine for cleaning demostration.
This new design laser rust removal machine has equipped with a sepearte scanner head.
The weight is only 20kgs, you can also take up by hand easily.
There is oxidation and corrosion when metals meet oxygen and water vapor in air. It will greatly damage the metal workpiece and the rust will spread from outside to inside and become worse and worse as time goes on, until the whole workpiece is totally corrupted. So rust removal is extremely important.
Laser rust removal uses not chemical agents or mechanical polishing, so it is faster and safer. It has advantages of higher efficiency, high automation and no subsequent processing work, lower labor intensity and lower cost.
1. Laser cleaning has no grinding, non-contact, no thermal effect
2. Rapid, clean and accurate cleaning, removal of surface coatings, coatings, oxide;
3. No damage to substrate of the products;
4. High cleaning precision, strong controllability;
5. Can be used for a long time, low operating costs;
6. The device can realize automatic operation and simple operation;
7. Environmentally friendly, no supplies, no two pollution
8. It is suitable for various materials, etc.
|Fiber cable L||3 M||3 M||5 M||10M|
|Pulse Energy||0.67 mJ||1.5 mJ2||mJ||50 mJ|
|Clean speed||≤2 M²/Hour||≤10 M²/Hour||≤15 M²/Hour||≤50 M²/Hour|
|Cooling||Air cooling||Air cooling||Air cooling||Water cooling|
|Temperature||5-40 ℃||5-40 ℃||5-40 ℃||5-40 ℃|
|Voltage||Single Phase 220V, 50HZ||Single Phase 220V, 50HZ||Single Phase 220V, 50HZ||Single Phase 220V, 50HZ|
Small area cleaning and paint removal treatment, welding surface pretreatment, food line cleaning, printing wheel cleaning, precise position/size paint treatment, restoration of monuments, rust/oxide removal;
The whole surface or the designated part of the paint off, the welding department to remove paint inspection, the removal of oxides, oil, grease and production residues;
Die Cleaning, welding surface pretreatment, metal surface roughness, natural rock cleaning, metal and glass surface coating removal, the whole surface off paint;
Comparison with Traditional Clean Methods:
|Comparison||Laser Cleaning||Chemical Cleaning||Mechanical Grinding||Dry ice cleaning|
|Washing Method||non-contact cleaning||contact cleaning||Abrasive contact cleaning||non-contact cleaning|
|Harm to base material||None||Yes||Yes||None|
|Consumable||Power||Chemical Detergent||Abrasive paper, grinder, abrasive stone||Dry Ice|
|Washing result||Very good, very clear||Medium, uneven||Medium, uneven||Good, uneven|
|Precision Washing||Accuracy controllable. High precision||Uncontrollable, low precision.||Uncontrollable, medium precision.||Uncontrollable, poor precision.|
|Safety/Environment||No pollution||Chemical pollution||Dust pollution||No pollution|
|Operation||Easy to operate, portable or automation optional.||Complicated process, higher technical requirement of the operator. Pollution prevention measures required.||Need more time & manpower. Pollution prevention measures required.||Easy to operate, portable or automatic.|
|Investment||High investment on machine. But no consumable, low maintenance cost||Low investment on machine. But expensive consumables||Medium investment on machine. High man-power cost.||Medium investment on machine. High consumable cost.|
1 Q: What is the warranty of the laser rust removal machine?
A: 2 yearwarranty and whole life after-sale service.
2 Q: What is your payment terms?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after sale service?
A: Engineers can offer oversea services and we can also offer online service for little problems, using online chatting tools like Whatsapp to talk with customers directly for all questions .
4 Q: How is the operation of the laser cleaning machine?
A: We offer operation manual and videos, show you how to operate the machine.
We can also send engineers to your factory for training. Or you can send worker to gain training in our factory directly.
Contact Person: Mr. Andy Zuo