Laser Cleaning Machine
Laser Rust Removal
Fiber Laser Welding Machine
UV Laser Marking Machine
Precision Laser Cutting Machine
Metal Laser Cutting Machine
Fiber Laser Marking Machine
Jewelry Laser Welding Machine
CO2 Laser Engraving Machine
3D Crystal Laser Engraving Machine
Laser Texturing Machine
Laser Cladding Machine
Laser Wire Stripping Machine
Robotic Automation System
Channel Letter Bending Machine
Laser Trimming Machine
JackThanks so much for your overseas servive in our factory, after training, our worker can operate the machines very well.
ToniThe price is really reasonable with such good quality. We will buy more later.
ElmerNice to meet you on Canton Fair and thanks so much for all your technical support and training, now we can use the machine very well.
Alloy Steel Sheet Metal Laser Cutting Machine 2000W With Fully Automatic Tracking System
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Work Size||1500 X 3000 Mm||Cutting Thickness||0.1-18mm|
|Laser Power||2000W||Laser Type||Fiber Laser Device|
|Service||Oversea Service Available||Working Area||Sealed|
Sheet Metal Cutting Machine,
Fiber Laser Cutting Machine
Alloy Steel Sheet Metal Laser Cutting Machine 2000W Full automatic Tracking System
FL2000S-1530 Alloy Steel Sheet Metal Laser Cutting Machine has equiped with a high power laser device and a big sealed working area,which can protect the worker during cutting operation.
The laser cutter consists of 5 parts ,the machine bed host, electrical control, water cooling unit, air cooling system and Exhaust system.
First, the machine bed host is the main part of the whole laser cutting machine. Cutting function and cutting accuracy of laser cutting machine are realized by it. It consists of 6 parts ,the bed, laser source, cantilever, Z axis device, work table, the auxiliary system (Protective cover, gas and water) and operating table.
Second, the electrical control system is an important part of ensuring that all kinds of graphics running tracks, which is composed of the CNC and the low-voltage electric system.
The CNC machine bed Equipped with BECKOFF system. This system is based on Windows XP operation system.
Other auxiliary peripheral equipment including large water chiller, cooling system, exhaust system and power supply
1. Great Performance: Identical cutting quality on any cutting point is realized through fiber transmission.
2. High Efficiency: The rapid cutting speed is two times higher than that of CO2 laser machine.Its use-cost is low.
3. Low Consumption of Gas: Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4. Low Consumption of Energy: It is environment-protecting and energy-saving.Its power consumption is reduced by 20%-30% compared with that of CO2 laser machine.
5. Maintenance-free: Reflecting lens is not needed for fiber transmission.Much time is saved when optical path is adjusted.It is maintenance-free
6. Install Proportional Valve: Use software to change the air and control the air pressure automatically, no need to change the air manually, it can save you much time;
7. Stable working table: Use 8mm thick steel side board, around 3.5 tons in weight;
8. Dual drive, aging treatment, stress relief test to ensure long time fast running without changing shape;
9. Satisfied with flexible processing with small size and intense structure design.
10. Smaller Focal spot and cutting gap. Much more efficient and better processing quality.
|Laser output power||1000W/2000W/3000W|
|Laser wavelength||1070 nm|
|Laser type||Fiber laser souce|
|Max cutting speed||18m/min|
|Max cutting thickness||0-18mm according to material|
|Output energy regulating||10%~100%|
|Input electric power for laser||≤2KW|
|Type of cooling||Water cooling|
|Drive mode||Imported servo motor|
|Transmission mode||Imported high precision Rack and Pinion|
|Working temperature||5-45 degrees|
|Continous working time||24 hours|
|Max-range for cutting||3000mm×1500 mm/ 2500x1300mm|
|Service||Oversea service for installation and training|
It is used widly on advertising signs production, sheet metal structures, production of high and low voltage electrical cabinet,textile machinery parts,kithen, auto, machinery, metal technics, saw, electrical parts, glasses, spring, PCB, electical kettle, medical microelectronics, hardware, tools etc.
1 Q: What is the warranty of 100W laser rust removal machine?
A: The warranty is 1 year, but we offer whole life after-sale service.
2 Q: What is the payment terms do you have?
A: T/T, L/C, Westen Union, etc.
3 Q: What is the after-sale service?
A: Engineers can offer oversea services and we can also offer online service, using online chatting tools like Whatsapp to talk with customers directly for all questions .
4 Q: How is the quality of the machine?
A: Germany high technoloy with perfect quality.
5 Q: How is the operation of the laser rust removal machine?
A: We offer operation manual and videos, show you how to operate the machine.
We can also send engineers to your factory for training. Or you can send worker to gain training in our factory directly.