Pipe Making System with 1KW Fiber Laser Welding after bending
The system is consist of
1. Pipe making machine
2. 1KW fiber welding machine
3. Pipe mould fixture
5. Pipe rangeΦ9～Φ50.8mm, Thicknessδ0.2-1.0mm
6. Pipe moving speed range: ≤12M/min
7. Drive motor(Siemens motor ,Frequency control) 7.5kw. Voltage: 3 Phase 400V 50Hz
A. Pipe making machine
1. Pipe making machine has the double coils loading frame, Diameter of coiler Ф350-Ф550mm ,Loading capacity 1.5T.
2. Forming stage:
(1)Feeding guide 2 sets: By feeding device and three roller leveling device to feeding. 1 set
(2)Vertical holders, 7 sets. The main axle uses the 40Cr, and with tempering, high frequency quench, accurate grinding, rust prevention. The holders are use HT200 material.
(3) Pipe making machine diameter of vertical axlesφ40mm, Diameter of Horizontal axlesφ25 mm, Straightening axles φ30.
(4)Horizontal type holder, 8 sets. The main axle uses the 40Cr,and with tempering, high frequency quench, accurate grinding, rust prevention. The holders are use HT200 materi(4)Spiral gear box drive system ,1set;
(5)Basic, 1 set
(6)212 universal drive shaft connecting for cars.
B 1KW Fiber laser welding system 1 set
1. 1KW Fiber laser System from Raycus China
2. Special fiber laser cooling system
3. Laser welding head from LaserMeck US
4. Laser welding gas protect system
5. Special welding controller and industry computer
6. PLC control system
7. Laser welding head up and down worktable
8. Special control cabinet
C. Grinding equipment
(1)Grinding head ,3 Sets; Motor power 3kw
(2)Horizontal holder ,2 Sets
(3) Basic ,1 Set.
D. Sizing and straightening machine
(1)Vertical holders, 4 sets; (2)Horizontal type holders, 4 sets;
(3)Straightening head,2 sets;(4)Spiral gear box drive system, 1 set;
E. Automatic cutting system
(1)Metal saw circle cutting blade.
F. Finished frame, 1 set.
G. Electrical control system
(1)Electrical control system for the pipe machine, 1 set; (2)Stop button;
(3)With frequency converting control system
H. Rank for the machines
V: Horizontal H: Vertical Q: Grinding Heads TH1,TH2 : Straightening Frame