Wuhan Questt ASIA Technology Co., Ltd. 86--13294168619 info@questtlaser.com
Flat 3 Layer PP Non Woven Mask Making Machine

Flat 3 Layer PP Non Woven Mask Making Machine

  • High Light

    PP Non Woven Mask Making Machine

    ,

    Flat Non Woven Mask Making Machine

    ,

    3 layer face mask manufacturing machine

  • Application
    Public And Hospital
  • Dimension
    6800x3800x2000mm
  • Materials
    Melt Blown Nonwoven
  • Weight
    5T
  • Warranty
    1 Year And Permanent Service
  • Service
    Oversea Service
  • Place of Origin
    China
  • Brand Name
    Questt
  • Certification
    ISO CE
  • Model Number
    QA-KZJF
  • Minimum Order Quantity
    1 unit
  • Price
    Negotiable
  • Packaging Details
    Wooden case
  • Delivery Time
    5 - 15 days
  • Payment Terms
    T/T, Western Union, L/C
  • Supply Ability
    2000 sets each year

Flat 3 Layer PP Non Woven Mask Making Machine

 

    Flat Disposable Mask Machine System with 3 layer PP Nonwoven Blue Color CE Approved

 

Flat 3 Layer PP Non Woven Mask Making Machine 0

Equipment instruction:

QA-KZJF is mainly used for automatic forming of flat face mask: the whole roll of cloth is driven by the roller after unwinding, and the cloth is automatically folded and wrapped; the nose beam is pulled and uncoiled by the whole roll, cut at a fixed length and then imported into the wrapped cloth, and the two sides are welded to the seal through ultrasonic welding, and then sealed laterally by ultrasonic, and then cut and formed by the cutter; the mask is transported to the two ear belts of the mask through the assembly line for welding In the working position, the final mask is formed by ultrasonic welding; when the mask is made, it is transported to the flat belt line through the assembly line for collection.

 

Equipment installation and configuration requirements

(1) Equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);

(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;

(3) Equipment weight: ≤ 5000kg, ground bearing ≤ 500kg / m2;

(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 9kw;

(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;

(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).

 

System Construction

NO Part Name Unit Remark
1 Filter cloth / filter cotton / water absorption layer unwinding mechanism 3  
2 Nose strip unwinding mechanism 1  
3 Bridge straightening mechanism 1 Width 3-7mm
4 Driving and cutting mechanism of nose beam 1 Width 3-7mm
5 Fabric folding mechanism 1  
6 Rolling welding edge sealing mechanism 1 Double edge
7 Cloth driving mechanism 2  
8 Fabric folding mechanism 2  
9 Roll welding side seam mechanism 1  
10 Rolling mechanism 1  
11 Transfer line 3  
12 Shunt mechanism 2  
13 Ear band welding machine mechanism 2  
14 Blanking line 2  
15 operating system 1  
16 operation panel 1  
 

Suitable Raw Materials

Item Axis

Width

(mm)

Roll out diameter(mm) Roll Inner Diameter(mm) Weight
Cloth 3 170~200 Φ600 Φ76.2 Max 15kg
Nose Strip 1 3-7 Φ400 Φ76.2 Max 25kg
Ear Belt 4 3 —— —— ——

 

Production Standard size:175*95mm

 

Production Capacity :

(1) Production Efficiency : 100-110ppm;

(2) Qualified rate of equipment production: 99% (except that the incoming materials do not meet the requirements and the employees do not operate properly)

(3) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)

 

 

Machine system Overlook

Flat 3 Layer PP Non Woven Mask Making Machine 1

FAQ

1. Q: Can you provide overseas services?

A: Engineers who can serve overseas.

2. Q: How to use the machine?

A: Before sending the packaging machine to you, we will install it and test it, and then pack the whole device in a wooden box, so you do n’t need to install it again,

3. Q: Test packaging Before shipment?

A: we will surely 100% of the experimental test machine will be normal without problems.

4. Q: What is the warranty period?

A: One year warranty for the whole machine.

5. Q: What is the payment term?

A: Accept L / C or TT.

6. Q: What is the delivery time?

A: 15-20 days after receiving the deposit. Contact: 7 * 24 hours online service If you need to pack other materials / products or have any questions about the packaging machine, please feel free to email me or call us.