Payment & Shipping Terms:
|Laser Device:||IPG Fiber Source||Laser Power:||1000 Watts|
|Laser Wavelength:||1064 Nm||Sevices:||Wholelife Aftersale Service|
|Certificates:||CE FDA||Warranty:||24 Months|
|Scanning Width:||10-150 Mm||Fiber Cable Length:||10 Meters|
|Work Speed:||60 M2/hour||Key Words:||Laser Cleaning Machine Rust Removal|
1000W Laser Cleaning Machine with Robotic Arm, Automation Rust remover Germany IPG Brand
Traditional cleaning for moulds includes: sandblast, ultrasonic and CO,. Super hot moulds must be cleaned after hours of cooling, which takes so much time. This will damage the accuracy of moulds, chemical solvent and noises will also cause problems for safety and environment. Laser beam can be transferred through optical fiber, so it can clean the dead angles and other places that are difficult to clean; For rubber moulds, laser beam will not gasify it so that there will not be harmful gas Laser is already applied in tyre mould industry in Euramerican countries
The anti-sticking films in food moulds need periodic replacement. Laser cleaning is also more suitable than chemical reagent
QA-LC1000 1000W clean laser is a high laser power equipment for heavy rust and thick coating. The cleaning speed is very fast, can almost clean any coatings.
1. Laser cleaning is universally acknowledged as the most reliable and effective solution for all materials with features of non-contact, no grind and no heat effect.
2. Laser power from 30-1000 W for different laser cleaning applications High efficient clean speed of4m'-40m /h Accurate cleaning for exact position and precise size Widely applied in flat, curved and three-dimensional surface for work piece of elastic material and plastic with very small and deep holes.
3. Flexible operation for work pieces with complicated geometric construction can be realized by mechanized or hand- held laser cleaning head
4. No maintenance and no consumables Dust-free, no chemicals, no pollution Non-contact cleaning and no damage for substrate Extremely low cleaning cost and High cleaning efficiency
QA-LC1000 Laser Cleaning Machine for rust removal....
Introduction Laser Cleaning Machine Detailed.pdf
|Temperature||5-40 ℃||5-40 ℃||5-40 ℃||5-40 ℃||5-40℃|
The whole surface or the designated part of the paint off, the welding department to remove paint inspection, the removal of oxides, oil, grease and production residues;
Die Cleaning, welding surface pretreatment, metal surface roughness, natural rock cleaning, metal and glass surface coating removal, the whole surface off paint;
1 Q: What is the warranty of 1000W laser cleaning machine?
A: The warranty is 24 months. Offer wholelife aftersales service.
2 Q: What is your payment terms?
A: Any payment terms is acceptable.
3 Q: What is the service of your company?
A: Engineers can offer oversea services and online service.
4 Q: How is the operations?
A: We offer operation manual and videos, show you how to operate the machine.
We can also send engineers to your factory for training.The operation is easy to learn.
5 Q: What is the brand of laser?
A: IPG laser.
Contact Person: Mr. Andy Zuo